How Many Patterns Can Be Uploaded to a C658

Copy Settings ([Basic])

• Selecting the copy color (Color)
• Selecting the size and type of re-create paper (Paper)
• Enlarging or reducing an original epitome with whatsoever zoom ratio (Zoom)
• Using the Duplex/Combine function (Duplex/Combine)
• Sorting copied paper (Finishing)
• Copying the original in the loading direction with no rotation (Automobile Prototype Rotation)

Selecting the copy colour ([Color])

The original is copied using the selected color.

At that place are v color modes: [Auto Color] to re-create based on the original color, [Full Colour], [2 Color], [Single Color], and [Black].

1. Tap [Basic] - [Color].

   Settings	Description
   [Automobile Colour]	Tap this button to automatically select [Full Color] or [Black] according to the color of the scanned original when copying.
   [2 Color]	Tap this button to make a copy in the specified 2 colors. This costs less than making a full color copy. In the scanned original, an area judged to be colour is copied with the specified color, and an area judged to be black in black.
   [Full Color]	Tap this push button to brand a copy in full colour mode regardless of the color of the scanned original.
   [Black]	Tap this push to make a copy in black and white regardless of the color of the scanned original.
   [Single Color]	Copy in the specified unmarried color. This will produce a lower cost colour copy than one printed in full colour. The original is copied by converting the color differences (apparent color densities) and the gradation levels into density differences of the single color.

Selecting the size and type of copy paper ([Paper])

This motorcar selects paper automatically based on the size of the detected original when making a copy. If necessary, you can specify a paper type or size different from that of the original to make a copy.

You lot tin can also change the size and blazon of newspaper loaded into a paper tray.

1. Tap [Basic] - [Paper].

   Settings	Description
   [Car]	Tap this button to automatically select paper fitting the size of the original when making a copy.
   [one] - [iv]	Tap this push to specify paper loaded into whatever of Tray1 to Tray4 to make a copy.
   [L]	Tap this button to copy onto the paper loaded into the Large Capacity Unit of measurement.
   [ ]	Tap this button to re-create onto the paper loaded into the Bypass Tray.
   [Alter Settings]	If necessary, change the size and type settings of the paper loaded in the selected paper tray. [Paper Type]: Select the type of the paper loaded into the selected newspaper tray. [Paper Size]: Select the size of the paper loaded into the selected newspaper tray. Selecting [Auto Detect] automatically detects the size of the loaded paper.

When very few sheets of paper remain in the paper tray, the icon indicating remaining paper quantities appears.

Icon	Description
	Indicates that very little paper remains in the paper tray.
	Indicates that there is no paper in the paper tray.

When paper other than plain paper or recycled paper is loaded into the paper tray, the icon indicating the paper blazon appears.

Icon	Paper type
	Single Side Merely
	Sparse paper
	Special Newspaper
	Thick 1
	Thick 1+
	Thick ii
	Thick 3
	Thick four
	Transparency
	Letterhead
	Colored Paper
	Envelope
	Index paper
	User Paper one
	User Newspaper ii
	User Paper iii
	User Newspaper 4
	User Paper five
	User Newspaper six
	Plain paper (Duplex second Side)
	Thick 1 (Duplex 2nd Side)
	Thick 1+ (Duplex 2nd Side)
	Thick two (Duplex second Side)
	Thick 3 (Duplex 2nd Side)
	Thick 4 (Duplex second Side)
	User Paper 1 (Duplex 2nd Side)
	User Paper 2 (Duplex second Side)
	User Paper iii (Duplex 2nd Side)
	User Paper 4 (Duplex 2nd Side)
	User Newspaper 5 (Duplex 2nd Side)
	User Paper six (Duplex 2d Side)

Tips

• User paper is a special paper of which the weight and media adjustment settings are registered. For details, contact your service representative.

Enlarging or reducing an original paradigm with any zoom ratio ([Zoom])

Enlarge or reduce an epitome with the specified zoom ratio to make a copy.

You can automatically specify the zoom ratio co-ordinate to the original size and paper size by selecting from the registered zoom ratios, or past manually entering an arbitrary zoom ratio.

1. Tap [Bones] - [Zoom].

   Settings	Description
   [Auto Zoom]	Tap this button to automatically brand a copy with the optimal zoom ratio to match the paradigm of the original with the paper size. It is user-friendly that yous practice not need to specify the zoom ratio.
   [Full Size]	Tap this button to copy an original paradigm with the same size as for the original (x1.0).
   [Enlarge]	Tap this push button to select a preset zoom when enlarging a standard-size original onto a standard-size piece of paper for copying.
   [Reduce]	Tap this push button to select a preset zoom when reducing a standard-size original onto a standard-size slice of newspaper for copying.
   [Minimal]	Tap this button to place an original image in the center subsequently slightly reducing the original size when copying. This function is available when copying the unabridged original epitome, including its edges.
   [Manual]	Enter whatever zoom ratio using the Keypad.
   [Set Zoom Ratio]	Tap this button to brand a copy at the registered zoom ratio.

Using the Duplex/Combine function ([Duplex/Combine])

Copy an original onto both sides of the paper. A 2-folio original is reduced and copied on the same side of a unmarried sail of paper.

1. Tap [Basic] - [Duplex/Combine].

   Settings	Clarification
   [Original > Re-create]	Select a combination of the original to be loaded (1-sided original or 2-sided original) and the re-create method (i-sided copy or 2-sided copy). To scan a two-sided original, specify whether to set the original to Superlative Bind or Left Bind/Right Bind in [Original Bounden Pos.] To make a 2-sided re-create, specify whether to set a copy to Height Bind or Left Bind/Correct Bind in [Output Bind Management].
   [Combine]	Select whether to reduce and re-create a two-page original on the same side of a single canvas of newspaper.
   [Original Management]	Specify the orientation of the loaded original.
   [Original Binding Pos.]	Select the original binding position when a 2-sided original is loaded. [Car]: The binding position is specified automatically. When the long side of the original is 11-xi/16 inches (297 mm) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds eleven-eleven/16 inches (297 mm), the bounden position is set to the curt side of the newspaper. [Top]: Select this option when the binding position is set up to the top of the original. [Left Demark]: Select this option when the bounden position is set to the left of the original. [Right Bind]: Select this pick when the binding position is set to the right of the original.
   [Output Bind Direction]	Select the bounden position when printing onto both sides of sheets of paper. [Auto]: The bounden position of a re-create is specified automatically. When the long side of the original is 11-eleven/16 inches (297 mm) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 11-11/16 inches (297 mm), the binding position is set to the short side of the newspaper. [Top]: Select this option when setting the binding position to the superlative of a re-create. [Left Bind]: Select this selection when setting the bounden position to the left of a re-create. [Right Demark]: Select this option when setting the binding position to the correct of a copy.

Sorting copied paper ([Finishing])

Specify how to feed out copied sheets of paper.

1. Tap [Basic] - [Finishing].

   Settings	Description
   [Group/Sort]	Select the output method when multiple sets of copies are printed. [Car]: Automatically switches Group and Sort depending on the number of sheets of the loaded original and the number of copies. If you load originals of multiple pages and specify multiple copies, the mode is automatically switched to Sort in order to process output. If other conditions are set, output processing is carried out in Group way. [Collate (Past Set)]: Feeds out copies separately one past one like "12345", "12345", "12345". [Group]: Feeds out copies separately page by page like "111", "222", "333", "444", "555".
   [Offset]	Select [Yes] when sorting past copies or by page to feed out paper. If the Finisher or Job Separator JS-506 is installed, the copies are fed out and stacked on pinnacle of each other with each re-create or page set staggered to split up them. If no Finisher or Job Separator JS-506 is installed, printed copies are fed out and sorted in an alternating crisscross blueprint when the following weather are satisfied. viii-1/2 11, A4, or B5 paper is used Newspaper of the same size and type is loaded with the orientation in one paper tray and with the orientation in another tray Specifying Automobile Newspaper for the paper size setting
   [Staple/Punch]	[Staple]: Select a binding position to staple sheets. [Corner]: Each set of printed sheets is stapled in a corner (top left or pinnacle right) before it is output. [2 Position]: Each set of printed sheets is stapled at two positions (in the superlative, left, or right) earlier information technology is output. [Position Setting]: Select the binding position and original loading direction. If [Auto] is specified for the binding position, the bounden position is determined automatically based on the direction of the loaded original. [Dial]: Select binding positions when punching sheets. [Position Setting]: Select the punch position and original loading direction. If [Motorcar] is specified for the punch position, the punch position is adamant automatically based on the direction of the loaded original.
   [Fold/Bind]	Select how to fold or bind newspaper. [Half-Fold]: Feeds out a copied sheet by folding it in two. [Center Staple & Fold]: Staples and feeds out a copied canvas by folding it in ii. [Tri-Fold]: Feeds out a copied canvass by folding it in three. [Z-Fold]: Z-folds the long side of a copied sail earlier feeding it out. This selection is available when press paper of: eleven 17 , 8-1/2 14 , A3 , B4 , or 8K . Selecting viii-1/ii 14 folds paper in two instead of Z-folding.

Tips

• To use the Staple role, the optional Finisher is required.

• To use the Punch function, the optional Finisher and Punch Kit are required.

• bizhub C658/C558/C458:
  To use the One-half-Fold, Eye Staple, or Tri-Fold part, the optional Finisher FS-537 and Saddle Stitcher SD-512 or the optional Finisher FS-536 and Saddle Stitcher SD-511 are required.
  To use the Z-Fold function, the optional Finisher FS-537 and Z Folding Unit are required.

• bizhub C368/C308/C258:
  To use the Half-Fold, Center Staple, or Tri-Fold role, the optional Finisher FS-534 and Saddle Stitcher SD-511 are required.

Copying the original in the loading direction with no rotation ([Auto Image Rotation])

This auto automatically adjusts the rotation for copying even if the orientations of the original and paper are different. When necessary, y'all can copy the original without adjusting the rotation.

This role is available when copying only a part of the original.

1. Tap [Basic] - [Motorcar Image Rotation].

gehlarip1945.blogspot.com

Source: https://manuals.konicaminolta.eu/bizhub-C658-C558-C458-C368-C308-C258-UD/EN/contents/id14-_102035710.html

Share this post